Civil Law And Bridge Structural Sensor Failure Liability Claims In Europe .
Civil Law and Bridge Structural Sensor Failure Liability Claims in Europe
1. Introduction
Bridge structural sensor failure liability concerns civil liability arising when sensors or sensor-based monitoring systems installed on a bridge fail to detect, transmit, record, interpret, or properly communicate structural deterioration and that failure contributes to damage.
Modern bridges may use:
strain gauges;
accelerometers;
displacement sensors;
corrosion sensors;
crack sensors;
temperature sensors;
vibration sensors;
load sensors;
fibre-optic sensors;
cameras;
IoT devices;
wireless sensor networks;
cloud-based monitoring;
AI-based structural-health-monitoring systems.
The legal problem is different from ordinary bridge-construction liability because the bridge may be physically sound when the monitoring system is installed. The alleged failure may instead be:
Sensor defect → incorrect data → failure to detect danger → failure to warn/inspect/repair → structural damage or injury.
European law does not yet have a large body of reported cases specifically deciding "bridge structural sensor failure". Therefore, the strongest authorities come from bridge/construction liability cases, infrastructure-maintenance cases, professional monitoring cases and EU product-liability principles. This distinction is important.
2. Basic Legal Structure
A typical claim can be represented as:
Bridge sensor
↓
Sensor malfunction / incorrect calibration / software failure
↓
Incorrect or missing structural data
↓
Failure to identify deterioration
↓
Failure to warn or intervene
↓
Bridge damage / closure / collapse / personal injury
↓
Civil liability
The central legal questions are:
Who supplied the sensor?
Who installed it?
Who was responsible for calibration?
Who was responsible for maintenance?
Who monitored the data?
Who was required to interpret the data?
Was there a contractual obligation to provide accurate data?
Was there a duty to react to abnormal readings?
Did the sensor defect actually cause the damage?
Was the bridge operator itself negligent?
3. Important European Legal Sources
A. National construction liability
European civil-law jurisdictions generally impose obligations concerning:
defective construction;
structural safety;
professional negligence;
maintenance;
contractual performance;
latent defects;
construction supervision.
France provides a particularly important example through its ten-year construction liability regime (responsabilité décennale).
Where a bridge defect compromises the solidity of the structure or makes it unsuitable for its intended purpose, the relevant construction professionals may face statutory liability.
4. Product Liability
A sensor may itself be a product.
For example:
A manufacturer sells a strain sensor designed to detect excessive bridge deformation.
If the sensor contains a manufacturing or design defect and causes legally recognised damage, product-liability principles may become relevant.
The EU Product Liability Directive 2024/2853 is particularly important for modern sensor systems because the EU's product-liability framework has been adapted to digital products and software.
A sophisticated bridge-monitoring system can involve:
Sensor + firmware + software + cloud service + AI analytics.
Therefore, determining what constitutes the "product" and who controls each component can become crucial.
5. Contractual Liability
A bridge operator may have a contract with:
sensor manufacturer;
engineering company;
monitoring company;
software provider;
maintenance contractor;
infrastructure concessionaire.
The contract may specify:
sensor accuracy;
availability;
response times;
calibration;
maintenance;
alarm thresholds;
data storage;
cybersecurity;
emergency notification.
A failure to satisfy those obligations may constitute breach of contract even when no physical defect exists in the bridge itself.
6. Tort/Delict Liability
Where a sensor failure injures third parties, non-contractual liability may arise.
Example:
A sensor should detect dangerous deformation but repeatedly reports normal conditions. The operator therefore keeps the bridge open. A structural failure injures motorists.
Possible defendants include:
sensor manufacturer;
installation contractor;
monitoring company;
engineering consultant;
bridge operator;
maintenance contractor;
public authority.
The claimant normally has to establish the relevant elements of the applicable national law, including breach/fault where required, damage and causation.
7. The Critical Issue: Causation
Sensor litigation is particularly difficult because the sensor often does not physically cause the structural failure.
Suppose:
Corrosion weakens a bridge → sensor fails → operator does not detect corrosion → bridge remains open → collapse occurs.
The defendant may argue:
"The corrosion caused the collapse, not the sensor."
The claimant may respond:
"If the sensor had functioned correctly, the corrosion would have been detected and the bridge would have been closed or repaired."
Therefore, the causal chain becomes:
Sensor failure → information failure → decision failure → physical damage
Expert engineering evidence will usually be central.
8. Case Law
Case 1: Adusbef v Presidenza del Consiglio dei Ministri
C-683/22, CJEU, 7 November 2024
This is one of the most important recent European authorities involving bridge infrastructure and maintenance responsibility.
The case arose in connection with the Morandi Bridge collapse in Genoa and motorway concession arrangements.
The CJEU considered Article 43 of Directive 2014/23/EU concerning modification of concession contracts, including circumstances involving serious failures concerning maintenance and preservation of motorway infrastructure. (EUR-Lex)
Importance
The case demonstrates that bridge safety can become connected with:
concession obligations;
infrastructure maintenance;
reliability of the concessionaire;
public-authority oversight;
contractual modification;
continuing safety obligations.
Relevance to sensor failure
Suppose a concessionaire has a contractual duty to monitor and maintain a bridge.
The concessionaire cannot necessarily argue:
"The bridge was originally constructed by someone else."
The continuing maintenance and preservation obligations may remain relevant.
A sensor system may therefore form part of the concessionaire's broader safety-management system.
Principle
Bridge safety responsibility can extend beyond original construction to continuing maintenance and preservation obligations.
This is an infrastructure/concession analogy, not a decision specifically determining sensor malfunction liability. (EUR-Lex)
9. Case 2: French Administrative Court of Appeal — Bridge Waterproofing and Construction Liability
CAA Lyon, 11 October 2012, No. 11LY02102
This case concerned renovation work on a bridge.
The court considered whether defects in:
waterproofing;
concrete support;
joints;
bridge surfacing
could engage the decennial liability of construction professionals.
The court held that the defects could render the bridge unsuitable for its intended purpose and therefore engage the ten-year construction liability regime. (Légifrance)
The court also examined the respective responsibilities of:
construction companies;
the public owner;
the project manager;
technical professionals.
BCI/sensor analogy
The important principle for sensor litigation is allocation of responsibility among multiple technical participants.
A bridge-monitoring project may similarly involve:
Owner → engineer → sensor installer → software provider → maintenance contractor.
If a monitoring system was inadequately designed or installed, responsibility may have to be divided according to each party's role.
Principle
Different technical participants can bear responsibility according to their respective contractual and professional functions.
10. Case 3: CAA Nantes, 8 April 2022, No. 20NT03819
This case concerned serious defects in a viaduct, including:
reinforcement deficiencies;
internal sulphate reaction;
cracking;
structural-safety concerns.
The court considered the French ten-year construction liability regime.
It held that defects capable of compromising structural safety can constitute a qualifying construction defect even where the full consequences have not yet materialised. (Légifrance)
The court also considered responsibility involving:
contractor;
engineering office;
project-management functions;
construction supervision.
Sensor significance
This is particularly relevant to early-warning monitoring.
Imagine:
Sensors detect progressive structural deterioration, but the monitoring contractor fails to report it.
A claimant could argue that the failure prevented timely intervention, allowing a structural defect to progress to a condition compromising the bridge's safety.
The case illustrates the importance of distinguishing:
initial structural defect
from
failure to detect/respond to an evolving defect.
Principle
A structural defect can attract construction liability when it threatens structural safety or the intended use of the infrastructure. (Légifrance)
11. Case 4: CAA Marseille, 15 June 2020, No. 17MA04886
This case involved the Beaucaire-Tarascon bridge.
The bridge's concrete pylons developed cracking associated with an internal sulphate reaction.
Expert evidence concluded that the deterioration could ultimately compromise:
structural strength;
existence of the structure;
suitability for its intended purpose.
The court considered the application of the ten-year construction liability regime. (Légifrance)
The defendant also argued force majeure and sought to attribute responsibility to other participants.
The court examined whether the deterioration was foreseeable and whether the circumstances justified exemption from liability. (Légifrance)
Sensor relevance
This case is useful where sensor monitoring is supposed to identify progressive deterioration.
Suppose:
bridge deterioration develops slowly;
sensors are installed to identify the deterioration;
the sensor gives incorrect readings;
the deterioration eventually becomes dangerous.
The claimant can use expert evidence to reconstruct:
when the deterioration began → when it should have been detected → what the sensor recorded → what the operator did → when intervention became necessary.
Principle
Progressive structural deterioration and expert evidence can establish the seriousness and foreseeability of bridge defects. (Légifrance)
12. Case 5: German Federal Court — BGH, VII ZR 46/09
Bundesgerichtshof, 5 August 2010
This German case concerned architect liability for inadequate construction supervision.
The BGH stated that an architect responsible for construction supervision must disclose to the client where parts of construction were deliberately not supervised in accordance with the contractual requirements. (Bundesgerichtshof)
Sensor analogy
The principle is highly relevant to automated bridge monitoring.
Suppose an engineering company has undertaken to:
monitor sensor output;
review abnormal signals;
investigate alarms.
It cannot necessarily treat the installation of sensors as the end of its professional responsibility.
The contractual monitoring function may include:
observe → analyse → identify abnormality → report → recommend intervention.
Principle
A professional entrusted with supervision cannot simply disregard the supervisory obligations forming part of its contractual role. (Bundesgerichtshof)
13. Case 6: German Federal Court — Construction Defect and Damage to Other Parts
BGH, construction-liability jurisprudence
German Federal Court jurisprudence has recognised circumstances in which defective construction or defective repair can cause legally relevant damage to other parts of a structure.
In one BGH decision concerning defective repair, the Court discussed cases where defective work causes damage to other parts of a building that were not themselves the subject of the original repair. (Bundesgerichtshof)
Sensor application
This becomes important when a sensor is installed into an existing bridge.
Example:
A contractor drills into a bridge component to install sensors and improperly damages reinforcement.
The sensor itself might work perfectly.
But the installation process creates a structural defect.
The liability analysis would then concern:
negligent installation;
damage to existing structural elements;
professional standards;
causation;
contractual obligations.
Principle
Liability may arise from the manner in which a monitoring system is installed, even when the monitoring device itself is functioning correctly.
14. Case 7: German BGH — Construction According to Unapproved Plans
BGH, 2002 construction decision
The BGH held that construction performed contrary to the agreed and approved plans constituted a contractual defect and could generate liability for defective construction. (Bundesgerichtshof)
Sensor application
Consider a bridge-monitoring contract specifying:
100 strain sensors;
particular sensor locations;
defined accuracy;
redundant monitoring;
specified alarm thresholds.
The contractor installs:
fewer sensors;
sensors in different locations;
sensors with lower accuracy.
Even if the sensors technically function, the monitoring system may fail to conform to the agreed design.
Principle
Compliance with the agreed technical specification is an important component of construction-contract performance.
15. Case 8: French Viaduct Defect Litigation — Importance of Detection
CAA Nantes, No. 20NT03819
The court's reasoning also illustrates a particularly important issue for sensor-based monitoring: whether the owner or operator should have detected the defect earlier.
The court considered arguments concerning whether inspections could have detected defects in time and whether the structural deficiencies were apparent. (Légifrance)
Sensor significance
For a sensor claim, the parties may therefore dispute:
Was the monitoring system reasonably capable of detecting the defect?
This requires comparison between:
the actual sensor performance;
contractual specifications;
engineering standards;
expected bridge behaviour;
available technology;
inspection procedures.
16. What Counts as Sensor Failure?
Sensor failure is broader than complete physical breakdown.
It may include:
1. Hardware failure
Sensor stops working.
2. Calibration failure
Sensor continues operating but gives systematically incorrect measurements.
3. Installation failure
Sensor is installed in the wrong location.
4. Communication failure
Sensor measures correctly but data never reaches the monitoring centre.
5. Software failure
Data is received but incorrectly processed.
6. Algorithmic failure
AI incorrectly interprets structural behaviour.
7. Alarm failure
The system identifies danger but fails to trigger an alert.
8. Human-response failure
Alarm is generated but nobody investigates it.
9. Maintenance failure
Sensor deteriorates because required maintenance was not performed.
10. Cybersecurity failure
An attacker modifies or suppresses sensor data.
17. Sensor Manufacturer Liability
A sensor manufacturer could potentially be liable where:
the sensor is defectively designed;
components are defective;
the sensor has inadequate accuracy;
warnings are inadequate;
software is defective;
firmware contains errors;
cybersecurity protections are inadequate.
The claimant must establish the applicable legal elements under the relevant national and EU framework.
18. Installer Liability
The installer may be responsible where:
sensors are installed incorrectly;
sensors are placed at incorrect locations;
wiring is defective;
calibration is wrong;
environmental protection is inadequate;
waterproofing is defective;
sensor connections are incorrectly configured.
Example
The contract requires a strain sensor to be attached to a bridge's main load-bearing element.
The installer attaches it to a secondary component.
The sensor produces accurate measurements of the secondary component but fails to monitor the critical structural element.
That can constitute installation non-conformity, even though the sensor itself works.
19. Engineering Consultant Liability
Engineering professionals may have duties relating to:
selection of sensor technology;
placement;
monitoring methodology;
interpretation;
alarm thresholds;
structural modelling;
response recommendations.
If an engineer designs an inadequate monitoring system, professional liability may arise under national civil law.
20. Bridge Operator Liability
The bridge operator may have responsibility for:
inspection;
maintenance;
responding to alarms;
closing the bridge;
commissioning repairs;
maintaining monitoring systems.
A sensor system normally does not replace the operator's engineering responsibility.
This point is also reflected in modern bridge-monitoring practice: sensor data is generally an indicator that must be interpreted within the structural context rather than an automatic substitute for engineering judgment. A Swiss government innovation-sandbox project specifically identifies questions of responsibility for sensor installation, calibration, data integrity, interpretation and maintenance.
21. False Negative vs False Positive
This distinction is extremely important.
False negative
The sensor says:
"Everything is safe."
But the bridge is actually dangerous.
This is potentially much more serious because the operator may continue allowing traffic.
False positive
The sensor says:
"Danger."
But the bridge is actually safe.
This may cause:
unnecessary closure;
traffic disruption;
economic losses;
emergency inspection costs.
The legal consequences can differ substantially.
22. Failure to React to Correct Data
Not every sensor-related claim is really a sensor defect.
Suppose:
Sensor → correctly detects crack → alarm issued → engineer ignores alarm → bridge later collapses.
Here the sensor may have performed perfectly.
The potential liability instead concerns:
monitoring personnel;
engineer;
bridge operator;
maintenance contractor;
public authority.
Therefore:
Correct sensor + incorrect human response = operational liability, not necessarily product defect.
23. Incorrect Interpretation of Data
A sensor provides a measurement, not necessarily a legal or engineering conclusion.
For example:
Sensor: strain = 400 microstrain.
The engineer must determine:
whether 400 is normal;
whether it is increasing;
whether temperature affects the reading;
whether the bridge is overloaded;
whether the reading indicates cracking.
A monitoring provider that promises only data collection has a different responsibility from one contracted to provide structural-safety analysis.
24. Contract Scope Becomes Critical
The contract should be examined carefully.
Contract A
"Supplier shall provide sensor hardware."
Liability may primarily concern product quality and supply.
Contract B
"Supplier shall install and calibrate sensors."
Installation and calibration become additional obligations.
Contract C
"Supplier shall continuously monitor structural condition and issue warnings."
The supplier's potential liability becomes substantially broader.
Contract D
"Supplier shall autonomously identify structural safety risks."
AI/software performance becomes central.
25. Product Liability vs Construction Liability
These should not be confused.
| Situation | Likely legal focus |
|---|---|
| Defective sensor manufactured | Product liability |
| Incorrect sensor installation | Construction/contractual liability |
| Poor sensor design | Professional/product liability |
| Failure to maintain sensor | Contract/negligence |
| Failure to interpret data | Professional/operator liability |
| Failure to close bridge | Operator/public-authority liability |
| Defective bridge construction | Construction liability |
| Cyberattack altering sensor data | Cybersecurity + contract/product/tort issues |
| AI incorrectly analyses sensor data | Software/product/professional liability |
26. Causation in a Hypothetical Claim
Suppose a bridge collapses.
The claimant must potentially establish:
Step 1
There was a structural deterioration.
Step 2
The monitoring system should have detected it.
Step 3
The sensor failed or generated unreliable data.
Step 4
The responsible party should have recognised the failure.
Step 5
Correct monitoring would probably have resulted in intervention.
Step 6
Intervention would probably have prevented or reduced the damage.
This is sometimes described as a counterfactual causation analysis.
27. Concurrent Causes
A bridge failure can have multiple causes:
Corrosion + design defect + poor maintenance + sensor failure
The defendant may argue:
"The sensor was only one small factor."
The claimant may argue:
"Without the sensor failure, the danger would have been detected before collapse."
The court may therefore need expert evidence concerning the relative contribution of different factors.
28. Expert Evidence
Sensor litigation will normally require technical experts.
Structural engineer
Determines:
structural deterioration;
load capacity;
failure mechanism.
Sensor engineer
Determines:
sensor accuracy;
calibration;
placement;
hardware failure.
Software expert
Determines:
data processing;
algorithmic errors;
software reliability.
Data expert
Determines:
data integrity;
missing data;
transmission failures.
Cybersecurity expert
Determines:
unauthorised access;
manipulation;
system vulnerabilities.
29. Digital Evidence
Important evidence may include:
raw sensor data;
timestamp records;
calibration certificates;
firmware versions;
software versions;
alarm logs;
maintenance records;
server logs;
network records;
cybersecurity logs;
engineering reports;
inspection reports;
emails;
warning notifications;
bridge-closure records.
The integrity of sensor data itself can become a contested issue.
30. Cybersecurity and Sensor Manipulation
Modern structural-health-monitoring systems may be connected to networks.
Imagine:
Hacker modifies sensor data from "critical" to "normal."
The physical sensor works perfectly.
The legal question becomes:
Who was responsible for protecting the data pathway?
Possible responsibilities may lie with:
sensor manufacturer;
software provider;
cloud provider;
network operator;
bridge operator.
A cybersecurity vulnerability may therefore create a separate liability pathway.
31. Force Majeure
Defendants may argue:
lightning;
flood;
earthquake;
extreme temperature;
vandalism;
cyberattack;
extraordinary electromagnetic interference.
But force majeure is jurisdiction- and contract-dependent.
A natural event will not automatically excuse liability if:
the risk was foreseeable;
the system was inadequately protected;
contractual maintenance was inadequate;
redundancy should reasonably have been provided.
The French Beaucaire-Tarascon litigation illustrates how courts examine whether an alleged external phenomenon was genuinely unforeseeable and irresistible rather than accepting force majeure automatically. (Légifrance)
32. Redundancy and Fail-Safe Design
For safety-critical bridges, one sensor should not necessarily be the only source of safety information.
A system may use:
Sensor A + Sensor B + physical inspection + structural model
If Sensor A fails:
Sensor B identifies the abnormality.
A claim may therefore concern system design, not simply individual sensor malfunction.
For example:
The manufacturer knew that a single sensor failure could conceal a dangerous structural condition but designed the system without redundancy.
That could potentially raise a design-defect or professional-negligence question depending on the applicable law.
33. Economic Loss
A sensor failure can produce purely economic losses without personal injury.
Examples:
bridge closure;
traffic diversion;
lost toll revenue;
business interruption;
emergency inspection costs;
replacement sensor costs;
emergency strengthening;
loss of use.
Whether such losses are recoverable depends heavily on the applicable national law and contractual relationship.
A claimant with a direct contract may have a stronger contractual route than an unrelated third party claiming purely economic loss.
34. Public Authority Liability
If a bridge belongs to a government authority, additional questions arise:
Was there a statutory inspection obligation?
Was the monitoring system properly procured?
Was the authority negligent?
Was the authority contractually responsible for maintenance?
Does public-law immunity apply?
Which administrative court has jurisdiction?
The Adusbef/Morandi Bridge litigation illustrates the complexity that can arise where infrastructure maintenance, concession obligations and public authorities overlap. (EUR-Lex)
35. Concessionaire Liability
A motorway or bridge concessionaire may have continuing responsibilities even when the infrastructure belongs to the State.
The legal relationship may contain:
maintenance obligations;
inspection requirements;
safety standards;
reporting requirements;
performance indicators;
penalty provisions.
A sensor-monitoring system can become part of that contractual safety architecture.
36. Limitation and Long-Term Monitoring
Bridge infrastructure is designed to last for decades.
Sensors may have much shorter lifespans.
Therefore, contracts should address:
replacement cycles;
firmware support;
calibration;
obsolescence;
data storage;
cybersecurity updates;
compatibility;
sensor availability.
A sensor supplier may not remain in business for the entire life of the bridge.
This creates a legal question:
Who bears responsibility when the original monitoring technology becomes obsolete?
37. Defences
Potential defendants may argue:
1. No contractual duty
The provider supplied only the hardware.
2. Sensor functioned correctly
The failure was caused by another component.
3. Operator failed to interpret the data
The sensor generated the correct warning.
4. Improper maintenance
The operator failed to calibrate the sensor.
5. Structural cause was independent
The bridge would have failed regardless of the sensor.
6. Force majeure
The failure resulted from an extraordinary external event.
7. Misuse
The monitoring system was operated outside its intended conditions.
8. Third-party interference
Another contractor altered the system.
38. Remedies
Depending on the legal basis and jurisdiction, remedies may include:
damages;
repair costs;
replacement of sensors;
replacement of monitoring systems;
emergency inspection costs;
bridge strengthening costs;
loss-of-use damages;
business-interruption damages where legally recoverable;
indemnity;
contractual penalties;
injunctions;
declaratory relief.
For personal injury, compensation can additionally include legally recognised:
medical expenses;
rehabilitation;
lost earnings;
pain and suffering;
other consequential losses.
39. Six Core Cases — Revision Table
| Case | Jurisdiction | Main principle | Sensor relevance |
|---|---|---|---|
| Adusbef, C-683/22 | CJEU | Infrastructure concession, maintenance and reliability | Bridge monitoring/maintenance |
| CAA Lyon, 11LY02102 | France | Bridge defects can engage decennial construction liability | Structural deterioration |
| CAA Nantes, 20NT03819 | France | Structural-safety defects and construction responsibility | Failure to detect/respond |
| CAA Marseille, 17MA04886 | France | Progressive bridge deterioration and expert evidence | Monitoring of evolving defects |
| BGH VII ZR 46/09 | Germany | Professional construction supervision obligations | Monitoring/supervision |
| BGH construction jurisprudence | Germany | Defective construction/repair can cause liability for consequential structural damage | Sensor installation damage |
These are analogical authorities rather than six cases directly adjudicating bridge-sensor malfunction. The distinction is important because the specific technology is comparatively new.
40. Practical Liability Matrix
| Failure | Potentially responsible party |
|---|---|
| Defective sensor hardware | Manufacturer |
| Wrong sensor specification | Engineer/designer |
| Incorrect installation | Installer |
| Poor calibration | Installer/maintenance provider |
| Software processing error | Software provider |
| AI interpretation error | Software/analytics provider |
| Failure to transmit alarm | Network/system provider |
| Failure to respond to alarm | Operator/engineer |
| Failure to maintain system | Operator/maintenance contractor |
| Cyberattack due to inadequate security | Potentially several actors |
| Incorrect structural interpretation | Engineer/monitoring provider |
| Failure to close unsafe bridge | Operator/public authority |
| Structural defect unrelated to monitoring | Constructor/designer |
41. Exam-Style Legal Formula
For an examination answer, use:
Sensor failure → identify contractual role → identify defective component → establish breach/defect → establish structural damage → establish causation → allocate responsibility among manufacturer, installer, engineer and bridge operator → consider EU product liability and national construction law → examine defences → calculate recoverable damage.
42. Ultra-Short Notes
Meaning
Bridge structural sensor failure liability is liability arising from defective or inadequate monitoring of a bridge's structural condition.
Main causes
hardware failure;
calibration error;
installation defect;
software error;
AI error;
communication failure;
maintenance failure;
cybersecurity failure;
failure to interpret warnings.
Main legal theories
Product liability
Contractual liability
Tort/delict
Construction liability
Professional negligence
Public-authority liability
Concession liability
Key cases
Adusbef — C-683/22
CAA Lyon — 11LY02102
CAA Nantes — 20NT03819
CAA Marseille — 17MA04886
BGH — VII ZR 46/09
German BGH construction-defect jurisprudence
43. Conclusion
Bridge structural sensor failure liability in Europe is best understood as a multi-layered civil-liability problem rather than a standalone "sensor law."
The most important distinction is between:
sensor failure → data failure → monitoring failure → decision failure → structural damage.
A sensor manufacturer may be responsible for a defective product, while an installer may be responsible for incorrect installation, an engineer for inadequate monitoring design, and an operator for failing to respond to warnings.
The French bridge cases demonstrate how European civil-law systems can impose substantial construction liability where structural defects compromise safety or intended use. (Légifrance) The German construction-supervision jurisprudence adds the important principle that professional supervision itself can constitute a legally significant obligation. (Bundesgerichtshof) The Adusbef judgment shows, at EU level, how bridge infrastructure can intersect with continuing maintenance, concession and reliability obligations. (EUR-Lex)
Final exam formula
Defective Sensor → Incorrect Data → Failure to Detect → Failure to Warn/Repair → Damage → Causation → Manufacturer/Installer/Engineer/Operator Liability → Product + Contract + Construction + Tort + Public-Law Rules → Damages/Repair/Other Remedies.

comments